Built In Shower Shelves

From $69.44 Regular Price $106.83

To $243.65 Regular Price $374.84

In stock


Customize Built In Shower Shelves

* Required Fields

Your Customization
Built In Shower Shelves
Built In Shower Shelves

In stock



    When redesigning a restroom, think about adding a Built In Shower Shelves into your design. It's a useful and streamlined way to include storage space for hair shampoos and soaps, without eliminating breathing space. Integrated wet-area counters are likewise a fantastic alternative to gunky corner counters and rusty wet-area caddies.

    Integrated Shower counters are such a helpful and gorgeous addition to a bathroom, bath or wet-area. Recessed wet-area counters to hold all your toiletries, shampoo and soap. Numerous tile alternatives.

    Trugard Counters recessed wet-area racks can be installed either horizontally or vertically to fit your area. With multiple models to pick from and the capability to integrate different sizes, you can develop an unique mix to fit your design requires.

    Create your Bathroom Haven
    Update your existing integrated wet-area with our one-piece, easy-to-install bathroom counters or set them with our other Tile items for a total wet-area restoration. You will find a broad choice of Tile wet-area pans, wet-area seats, shaving actions, designer drain plates and full wet-area sets.
    Upscale design
    Trugard Counters wet-area racks are recessed into your shower wall for designer elegance with everyday function. They provide all the benefit of a wet-area rack without the mess!
    Easy to set up
    Every Trugard Counters recessed wet-area counter features pre-drilled holes for simple setup and installation.
    All set to tile
    Counters can be easily tailored to match the feel and look of any wet-area. Simply install your racks and lay tile directly on the racks surface area.
    Long-lasting & long lasting
    All Trugard Counters recessed wet-area counters are waterproof, leak-proof and made of high quality plastic to hold up against sturdy use. Trugard Built-in shower shelves are the perfect all-in-one solutions for your next house enhancement task. Update your existing wet-area with a single, easy-to-install counters or pair it with Tile Ready pans and doors for a total wet-area replacement.

    Trugard Counters racks are available in over 30 designs including single, double, triple and quadruple mixes with both vertical and horizontal counter orientations. Our one-piece, double and quadruple racks are a fantastic method to add space-saving storage to your wet-area. Now you can keep all of your wet-area fundamentals in a single area without adding extra bulk and clutter to your wet-area.
    When the racks is installed, you can easily top it off with the tile, marble or stone of your choice for a leak-proof, waterproof and customized rack that seamlessly matches your bathroom decoration.

    Whether it's remodelling or new building, wall counters are a great method to produce more space in your bathroom. A counters or shower rack is simple to set up and offers the ideal location to put your restroom utensils. Here you will find a brief description about how-to install a wall counters in your restroom.


    Quickly produce more storage space
    If you are planning to redesign your existing bathroom to get more area, incorporating a wall counters or integrated wet-area counters into the brand-new style is a terrific way to get more storage space. These special pieces of restroom style can be custom fitted to virtually any area, from the tiniest and most cramped bathroom to the biggest and most luxurious one.

    Appropriate for drywall & strong wall
    Container serie wall counters can be put in both drywall and strong wall construction and can be utilized in existing wall buildings along with recently built walls.

    Range of colours & surfaces
    Integrated Wet-area shelves and wall counters can be found in a wide range of colors and finishes, so it is easy to pick a design that is perfect for your house. shelf for the corner of your shower Whether you select the classic beauty of stainless steel, the downplayed elegance of white and crème or the special contemporary appearance of anthracite, your bathroom will get a whole makeover, and you can enjoy the results each time you take a bath or wet-area.

    Endless choices

    Wall counters are also available in a diversity of designs and options, making it simple to fit this unique upgrade into your existing space. Whether you select the appeal of a bordered counters, the timeless style of a borderless wall counters or the adaptability of a tileable borderless style, you make certain to be impressed with the outcomes.

    Because many of us need a bottle of hair shampoo, a razor or a mirror in the wet-area, the question of wet-area storage becomes an essential one. There are a lot of alternatives for restroom storage in the wet-area, however each one has special benefits and disadvantages. See more about Shelfs


    A integrated wet-area counters is a complex beast, especially if you are having a professional construct a custom wet-area counters for you. Below are a few tips you must understand if you desire to avoid 4 Substantial wet-area counters install errors throughout your next wet-area remodel.

    If you have actually not yet devoted to a wet-area racks, read this article: Wet-area Counters Planning-- Don't get stuck with a wet-area caddy


    Don't Skip the Waterproofing
    Do Not Set Up a Retrofit Counters
    Make Sure It Incorporates with the Waterproofing Membrane
    Do Not Jeopardize the Wall Structure
    Reward Tip: Do Not Mount it in an Outdoors Wall


    If you plan to install a customized constructed wet-area counters into your wet-area wall, and you want to prevent making one of the biggest wet-area counters set up mistakes, you must ensure that you or your contractor doesn't forget the waterproofing action. When a customized racks is constructed well, it can look extremely strong, deceptively waterproof and strong. tileable shower shelf When wet-area counters are framed into the wet-area wall, this is an assumption made far too often. No matter how tight the joints might look in a freshly constructed counters, they will not keep water from penetrating and running into the stud cavity if it is not properly waterproofed. You may be believing that a leak like this seems unlikely if the racks is effectively tiled & grouted after building and construction, and you would be right ... ... for some time.

    The constant water direct exposure and regular temperature level changes makes the wet-area environment rather unforgiving. These environmental tensions trigger all parts of the wet-area assembly to move a little, primarily through growth and contraction. Without a waterproofing membrane, this movement nearly always triggers grout line breaking in your wet-area counters.


    If you choose to install a pre-manufactured, or ended up wet-area racks instead of a custom-made constructed one, you can prevent another wet-area racks set up mistake by ensuring that you never set up a retrofit wet-area racks. A retrofit racks is an item that is installed in the procedure of a new wet-area remodel task after the wet-area wall tile has actually currently been installed. What that indicates is that a hole is cut for the counters into the tile backer board after it is connected to the wet-area wall framing. The tile is then used on the wet-area wall as normal, but the hole is left exposed so the retrofit wet-area racks can be inserted into it. The racks is placed into this hole, and the outer flange on the racks is pushed against the tile. A bead of silicon around it's boundary finishes the setup. It does not take a waterproofing specialist to see that this small silicon bead is the only defense versus water encountering the wall cavity. Does that sound practical to you? If you stated no, you would be correct. It might look like a somewhat much easier way of setting up a wet-area racks, however it's not truly any much easier to install than some other completed wet-area counters items, and it breaks the industries suggested "finest practices". It's really not worth the risk.

    To avoid the BIG built-in wet-area racks set up mistake of not waterproofing, you absolutely desire to prevent the completed wet-area counters insert items that do not integrate with the wet-area wall waterproofing membrane. Although the waterproofing procedure of the custom-made wet-area shelves is a lot more included that of an ended up wet-area counters, it is similarly crucial. Only a few finished wet-area counters items include a boundary flange developed to be mounted flush with the tile backer board surface. This flange is critically essential since it is the surface upon which the wet-area wall waterproofing membrane will attach. It is just via this attachment that the integrity of the waterproofing membrane can be kept, keeping your wet-area wall safe from the danger of water infiltration into the wall cavity. In the section above, we went over the retrofit style of finished wet-area counters that DO NOT integrate with the wet-area wall waterproofing membrane.

    In the adjacent image you can see an example of a completed wet-area counters installed with the tile and membrane cut away to show the mounting flange, which also serves as a membrane bonding surface area (racks by Redblock Industries). Not just does this flange enable a positive accessory to the waterproofing membrane, it likewise permits an additional seal under the flange, and a firm attachment to the wet-area wall framing by means of the installing screws. This double protection can supply anybody with the piece of mind that their wet-area racks, and the whole surrounding assembly, will never ever leakage.

    Another BIG one among wet-area racks install errors, is the construction of a customized horizontal tiled counters that jeopardizes the structural stability of the wet-area wall. You have actually most likely seen numerous examples of this type of racks if you are considering setting up a racks in your new wet-area remodel job. These horizontal counters are the embodiment of luxury, sometimes covering the whole wet-area wall and using a substantial location for storage. There is a way to set up these wet-area shelves correctly and securely, but regrettably numerous contractors stop working to accomplish this.

    Most horizontal counters are set up in the back wet-area wall; typically the longest, and for that reason, the most flexible wall in your wet-area surround. Sometimes this is a bearing wall that the structural stability of your home depends upon, and in some cases it's not. In any case, cutting a horizontal swath out the structural members of this wall to make space for a counters is a problem. Some contractors think that applying the correct structural framing around the racks will sufficiently strengthen the structure. The problem is that these measures primarily attend to structural tensions applied from above, however do not effectively address the increased flexibility (reduction in rigidness) caused by cutting out the vertical framing. The integrity of a tiled assembly needs significant rigidity in this wall to minimize the possibility of grout splitting, tile delamination and failure of the waterproofing membrane. Some specialists do not even install the very little surrounding structure needed, which profoundly compromises the wall's structural rigidity. If the racks you are imagining for your next wet-area remodel will horizontally cover more than a couple of wall studs, the only method to appropriately and securely install it is to construct a new wall to contain the racks, in front of the wall where the counters was to be installed. This enables you to support the precarious top and bottom parts of this wall versus the surrounding & back walls. Talk to your contractor about it, since it's very crucial that you avoid this substantial wet-area racks set up error.

    As a general guideline it is constantly the best idea to install your completed or tiled wet-area racks in a wall that is not an outdoors dealing with wall. The issue is that the wet-area environment is a really moist one, and some of this wetness will constantly make it into the stud cavity through the wall tile, your tile backer board and frequently through your wet-area racks. How much water vapour will exist here is totally reliant on whether or not a waterproofing membrane has actually been installed on the wet-area wall and how well your wet-area racks withstands wetness penetration.

    Even without a wet-area counters, this can quickly occur within a 3 1/2 ″ stud wall in the cooler months, particularly if there is no waterproofing membrane on the wet-area wall. Of course, none of this will always take place if the wet-area wall and racks are appropriately waterproofed, and there is adequate space behind the wet-area counters for adequate insulation. In other words, you need to absolutely ask a trusted regional specialist prior to you choose to install a wet-area racks in an outside wall to prevent this possible wet-area racks issue.

    Setting up a built-in wet-area counters can be a deceptively made complex and risky endeavour, but it is possible to prevent the 4 huge wet-area racks install mistakes. By reading this article, ideally you have actually acquired some insights into the risks of setting up a wet-area racks incorrectly, and the rewards of doing the task. Best of luck with your new wet-area remodel task, AND enjoy your new wet-area racks!

    Great, design-oriented restroom storage is the distinction between a spa-like feel and a bathroom that appears like Grand Central Station after heavy traffic. With a couple of strategic and properly designed nooks and crannies its possible for your bathroom to seem like a charming sanctuary totally free from clutter and cords. With these built-in bathroom rack and storage ideas your "mess" will be safety stashed-- or perhaps concealing in plain sight!

    Some of these ideas can be taken on in a weekend, and some will provide you concepts for your next restroom remodelling. Regardless of just how much time, money, or Do It Yourself nerve you've got, you can produce your most gorgeous with these 25 integrated bathroom counter and storage concepts.

    Copyright © 2018 Trugard Direct. All Rights Reserved. | Created by AVID Dynamics.