There is no error
Array ( )

49" x 60" Center Drain Placement Linear Drain Shower Kit

Array ( )

From $879.00 Regular Price $1,352.31

To $982.00 Regular Price $1,510.77

In stock

SKU
TG-LDSKT-49x60-CTR-165
Customize 49" x 60" Center Drain Placement Linear Drain Shower Kit
TruSlope LD 49x60-SCP Standard Tray Center Placement   + $316.00
165 Sqft Membrane Roll   + $210.00
60" x 5" TruCurb Shower Curb   + $69.00
FREE - Seals & Corner Kit   + $0.00
FREE - Sealant Adhesive Caulk - 1 Tube 10.3 oz   + $0.00

* Required Fields

Your Customization
49" x 60" Center Drain Placement Linear Drain Shower Kit
49" x 60" Center Drain Placement Linear Drain Shower Kit

In stock

$879.00

Summary

    What's In this Kit:

    1 x Linear Drain - Choose from 3 styles (Classic, "S" Style, and Tile-In / Tileable) with sizes up to 48"

    1 x 165 Sqft Waterproofing Membrane Roll

    1 x 49" x 60" Shower Tray with center drain placement

    1 x 60" x 4 1/2" x 5" Shower Curb

    1 x Seals and Corners Kit - 4 inside corners, 2 oustide corners, 1 pipe seal, and 1 shower valve seal

    1 x 10.3oz Tube of TruSeal Adhesive Caulk Sealant


    About the Shower Tray:

    49" x 60" Linear Drain Standard Tray with Center Drain Placement

    What's Included

    1 x Four piece tray set measuring 49" x 60" with center drain placement.

    Technical Specifications

    Length: 49"
    Width: 60"
    Outer Height: 1 3/4"
    Inner Height: 1 1/8"

    How to Install

    1. Pre-fit the shower tray by measuring then cutting the tray to fit the desired placement.
    2. Place the linear drain onto its side marking the trench length then cutting out the “trench cut-out area” so that the drain trench sits down into the tray and the drain flanges sit on top of the tray.
    3. Place and seal the shower tray.
      1. Apply modified thin-set mortar to the substrate using a 1/4" x 3/8" square-notched trowel.
      2. Place the TruSlope shower tray onto the thin-set mortar.
      3. Use TruSeal Sealant Adhesive or thin-set mortar to bond the butt joints of the tray pieces together.
    4. Embed the tray into the mortar by firmly walking on the TruSlope tray.
    5. Install the Trugard Drain by generously applying modified thinset mortar and embedding TruLine linear drain into the thin-set mortar.
    6. Pre-fit the TruCurb by measuring and cutting the curb to length using a standard handsaw.
    7. Pre-cut the floor pieces of the Trugard Vapor-shield allowing for the membrane to go up the wall at least three (3) inches by cutting the membrane six (6) inches longer the floor width. Use a non-sharp pencil to mark the wall to floor intersections and corners. Cut the full corner (3” x 3”) square out of the membrane and discard.
    8. Apply modified thin-set mortar to: 1. The floor wall ends, 2. The edge of the shower tray using a 1/4” x 3/8” square-notched trowel. 3. Back butter the curb bottom and ends and then pressing the curb firmly into place.
    More Information
    Product Name Rewrite N/A
    Features

    What's In this Kit:

    1 x Linear Drain - Choose from 3 styles (Classic, "S" Style, and Tile-In / Tileable) with sizes up to 48"

    1 x 165 Sqft Waterproofing Membrane Roll

    1 x 49" x 60" Shower Tray with center drain placement

    1 x 60" x 4 1/2" x 5" Shower Curb

    1 x Seals and Corners Kit - 4 inside corners, 2 oustide corners, 1 pipe seal, and 1 shower valve seal

    1 x 10.3oz Tube of TruSeal Adhesive Caulk Sealant

    Copyright © 2018 Trugard Direct. All Rights Reserved. | Created by AVID Dynamics.