36" x 60" Center Drain Placement Curbless Base Tray Shower Kit

From $447.94 Regular Price $689.14

To $452.94 Regular Price $696.83

In stock

SKU
TG-SHRKT-CRBLS-36x60-110
Customize 36" x 60" Center Drain Placement Curbless Base Tray Shower Kit
Drain Flange Assembly - Oasi   + $39.95
110 Sqft Membrane Roll   + $144.00
TruSlope CD-Curbless 36x60-Center Placement   + $219.00
FREE - Seals & Corner Kit   + $0.00
FREE - Sealant Adhesive Caulk - 1 Tube 10.3 oz   + $0.00

* Required Fields

Your Customization
36" x 60" Center Drain Placement Curbless Base Tray Shower Kit
36" x 60" Center Drain Placement Curbless Base Tray Shower Kit

In stock

$447.94

Summary

    What's In this Kit:

    1 x Drain Grate - Choose from 3 colors and 5 styles

    1 x Drain Flange & Plug

    1 x 110 Sqft Waterproofing Membrane Roll

    1 x 36" x 60" Low-Profile / Curbless Shower Tray with center drain placement

    1 x Seals and Corners Kit - 4 inside corners, 2 oustide corners, 1 pipe seal, and 1 shower valve seal

    1 x 10.3oz Tube of TruSeal Adhesive Caulk Sealant


    About the Shower Tray:

    36" x 60" Center Drain Curbless Tray with Center Drain Placement

    What's Included

    1 x Four piece tray set measuring 36" x 60" with center drain placement.

    Technical Specifications

    Length: 60"
    Width: 36"
    Outer Height: 7/8"
    Inner Height: 1/16"
    Drain Hole Diameter: 5"
    Drain Flange Diameter: 12 1/8"

    Documents & Images

    How to Install

    1. For a Level-entry/Curbless shower, start by making the subfloor surface even with the top of the floor joists system by adding furring strips to the sides of the floor joists and adding subfloor substrate in between the floor joists.
    2. Prior to gluing and nailing/screwing the subfloor between the floor joists dry-fit the shower tray and mark the drain opening of the tray. Inside of the marked circle, mark and cut a 4” centered hole. Ensure the plumbing is completed/secured in the center of the hole.
    3. 3a. Dry-fit test The Tray and the Shower Drain prior to the permanent installation. Also double check to confirm that the floor substrate is of solid construction.
      3b. Apply modified thin-set mortar to the substrate using a 1/4” square-notched trowel.
    4. 4a. Place thinset between the four (4) TruSlope shower tray sections and onto the thinset mortar.
      4b. Solidly embed the tray into the mortar by walking firmly on the TruSlope tray.
    5. Install the Trugard Drain by generously applying modified thinset mortar in and around shower drain flange recessed area of the tray. Now align and press the drain downward to connect the waste line with PVC or PVC to ABS pipe cement glue already applied, and simultaneously embed the drain body down into the thin-set mortar to a height lower than the plane of the tray slope.
    6. Pre-cut at least the floor piece of the Trugard Vapor-shield/Steam-shield allowing for the membrane to go up the wall at least three (3) inches by cutting the membrane six (6) inches longer the the floor width. Use a non-sharp pencil to mark the wall to floor intersections and corners. Cut the full excess corner (3” x 3”) square out of the membrane.
    7. Apply Trugard Vapor-shield or Steam-shield with quality modified thinset or premium unmodified thinset mortar to the TruSlope tray substrate and up the the wall 4” using a 1/4" x 3/16" V-notched or 1/8” x 1/8” square-notched trowel as described in the Trugard Vapor-shield instruction handbook.
    More Information
    Features

    What's In this Kit:

    1 x Drain Grate - Choose from 3 colors and 5 styles

    1 x Drain Flange & Plug

    1 x 110 Sqft Waterproofing Membrane Roll

    1 x 36" x 60" Low-Profile / Curbless Shower Tray with center drain placement

    1 x Seals and Corners Kit - 4 inside corners, 2 oustide corners, 1 pipe seal, and 1 shower valve seal

    1 x 10.3oz Tube of TruSeal Adhesive Caulk Sealant

    Copyright © 2018 Trugard Direct. All Rights Reserved. | Created by AVID Dynamics.