There is no error
Array ( )

32" x 60" Center Drain Placement Shower Kit with 110 Sqft Roll, 60" Shower Curb, Corners, Sealant, 4'' Square Drain Kit with Flange, and Drain Grate Included

Array ( )
$402.79 Regular Price $619.69

In stock

SKU
TG-SHRKT-TRAY-3260-C-110
Customize 32" x 60" Center Drain Placement Shower Kit with 110 Sqft Roll, 60" Shower Curb, Corners, Sealant, 4'' Square Drain Kit with Flange, and Drain Grate Included
Drain Flange Assembly - Oasi   + $39.95
110 Sqft Membrane Roll   + $144.00
32" x 60" Center Drain Tray   + $99.85
60" x 5" TruCurb Shower Curb   + $69.00
FREE - Seals & Corner Kit   + $0.00
FREE - Sealant Adhesive Caulk - 1 Tube 10.3 oz   + $0.00

* Required Fields

Your Customization
32" x 60" Center Drain Placement Shower Kit with 110 Sqft Roll, 60" Shower Curb, Corners, Sealant, 4'' Square Drain Kit with Flange, and Drain Grate Included
32" x 60" Center Drain Placement Shower Kit with 110 Sqft Roll, 60" Shower Curb, Corners, Sealant, 4'' Square Drain Kit with Flange, and Drain Grate Included

In stock

$402.79

Summary

    What's In this Kit:

    1 x Drain Grate - Choose from 3 colors and 5 styles

    1 x Drain Flange & Plug

    1 x 110 Sqft Waterproofing Membrane Roll

    1 x 32" x 60" Shower Tray with center drain placement

    1 x 60" x 4 1/2" x 5" Shower Curb

    1 x Seals and Corners Kit - 4 inside corners, 2 oustide corners, 1 pipe seal, and 1 shower valve seal

    1 x 10.3oz Tube of TruSeal Adhesive Caulk Sealant


    About the Shower Tray:

    32" x 60" Center Drain Standard Tray with Center Drain Placement

    What's Included

    1 x Two piece tray set measuring 32" x 60" with center drain placement.

    Technical Specifications

    Length: 60"
    Width: 32"
    Outer Height: 1 5/8"
    Inner Height: 1/2"
    Drain Hole Diameter: 5"
    Drain Flange Diameter: 12.5"

    How to Install

    1. Pre-fit the shower tray by measuring then cutting the tray to fit the desired placement.
    2. Place and seal the shower tray.
      1. Apply modified thin-set mortar to the substrate using a 1/4" x 3/8" square-notched trowel.
      2. Place the TruSlope shower tray onto the thin-set mortar.
      3. Use TruSeal Sealant Adhesive or thin-set mortar to bond the butt joints of the tray pieces together.
    3. Embed the tray into the mortar by firmly walking on the TruSlope tray.
    4. Install the Trugard Drain by generously applying modified thinset mortar and embedding TruLine linear drain into the thin-set mortar.
    5. Pre-fit the TruCurb by measuring and cutting the curb to length using a standard handsaw.
    6. Pre-cut the floor pieces of the Trugard Vapor-shield allowing for the membrane to go up the wall at least three (3) inches by cutting the membrane six (6) inches longer the floor width. Use a non-sharp pencil to mark the wall to floor intersections and corners. Cut the full corner (3” x 3”) square out of the membrane and discard.
    7. Apply modified thin-set mortar to: 1. The floor wall ends, 2. The edge of the shower tray using a 1/4” x 3/8” square-notched trowel. 3. Back butter the curb bottom and ends and then pressing the curb firmly into place.
    More Information
    Product Name Rewrite N/A
    Features

    What's In this Kit:

    1 x Drain Grate - Choose from 3 colors and 5 styles

    1 x Drain Flange & Plug

    1 x 110 Sqft Waterproofing Membrane Roll

    1 x 32" x 60" Shower Tray with center drain placement

    1 x 60" x 4 1/2" x 5" Shower Curb

    1 x Seals and Corners Kit - 4 inside corners, 2 oustide corners, 1 pipe seal, and 1 shower valve seal

    1 x 10.3oz Tube of TruSeal Adhesive Caulk Sealant

    Copyright © 2018 Trugard Direct. All Rights Reserved. | Created by AVID Dynamics.