75" x 60" OneSlope Tray End Drain Placement Linear Drain Shower Kit

From $927.23 Regular Price $1,426.52

To $1,186.18 Regular Price $1,824.90

In stock

SKU
TG-LDSKT-CRBLS-75x60-END-220
Customize 75" x 60" OneSlope Tray End Drain Placement Linear Drain Shower Kit
75" x 60" One-Slope CURBLESS Linear Drain Shower Tray   + $210.69
220 Sqft Membrane Roll   + $322.32
Seals & Corner Kit   + $38.78
Sealant Adhesive Caulk - 1 Tube 10.3 oz   + $21.18

* Required Fields

Your Customization
75" x 60" OneSlope Tray End Drain Placement Linear Drain Shower Kit
75" x 60" OneSlope Tray End Drain Placement Linear Drain Shower Kit

In stock

$927.23

Summary

    What's in this Kit:

    1 x Linear Drain - Choose from 3 styles (Classic, "S" Style, and Tile-In / Tileable) with sizes up to 72"

    1 x 75" x 60" Curbless Shower Base Tray

    1 x 220 Sqft Waterproofing Membrane Roll

    1 x Seals and Corners Kit - 4 inside corners, 2 oustide corners, 1 pipe seal, and 1 shower valve seal

    1 x 10.3oz Tube of TruSeal Adhesive Caulk Sealant


    About the Shower Tray:

    75" x 60" Linear Drain Curbless Tray with End Drain Placement

    What's Included

    1 x Six piece tray set measuring 74.25" x 60" with end drain placement.

    Technical Specifications

    Length: 74.25"
    Width: 60"
    Outer Height: 1 1/2"
    Inner Height: 1/4"

    How to Install

    1. Pre-fit the shower tray by measuring then cutting the tray to fit the desired placement.
    2. Cut a rectangular hole into the floor substrate in the desired drain location to allow the linear drain trench to snugly fit down into the floor substrate, with the drain flanges being supported by the floor substrate.
    3. Place and seal the shower tray.
      1. Apply modified thin-set mortar to the substrate using a 1/4" x 3/8" square-notched trowel.
      2. Place the TruSlope shower tray onto the thin-set mortar.
      3. Use TruSeal Sealant Adhesive or thin-set mortar to bond the butt joints of the tray pieces together.
    4. Embed the tray into the mortar by firmly walking on the TruSlope tray.
    5. Install the Trugard Drain by generously applying modified thinset mortar and embedding TruLine linear drain into the thin-set mortar.
    6. Pre-cut the floor pieces of the Trugard Vapor-shield allowing for the membrane to go up the wall at least three (3) inches by cutting the membrane six (6) inches longer the floor width. Use a non-sharp pencil to mark the wall to floor intersections and corners. Cut the full corner (3” x 3”) square out of the membrane and discard.
    7. Apply modified thin-set mortar to: 1. The floor wall ends, 2. The edge of the shower tray using a 1/4” x 3/8” square-notched trowel. 3. Back butter the curb bottom and ends and then pressing the curb firmly into place.
    More Information
    Features

    What's in this Kit:

    1 x Linear Drain - Choose from 3 styles (Classic, "S" Style, and Tile-In / Tileable) with sizes up to 72"

    1 x 75" x 60" Curbless Shower Base Tray

    1 x 220 Sqft Waterproofing Membrane Roll

    1 x Seals and Corners Kit - 4 inside corners, 2 oustide corners, 1 pipe seal, and 1 shower valve seal

    1 x 10.3oz Tube of TruSeal Adhesive Caulk Sealant

    Copyright © 2018 Trugard Direct. All Rights Reserved. | Created by AVID Dynamics.