Linear Drain Installation Guide
Here’s a square corner, here’s a square corner. Now, these are 45 we cannot install them (Note: Preformed inside corner seals can’t be installed on 45 degrees angles, so seal them with Truseal) so we use the Trugard Truseal Sealant, and we caulk right here, and then, so we caulk it. Make sure we get it good in the corners there, then this seem that we overlapped down there. Okay, so we’ve got that. Now, put the corners. Spread some mud in the corners. Okay, clean that off, take your corner, set it in the corner there, take your trowel, put it on the bottom, flat, squeegee the excess there. Squeegee the excess mud out. Okay, here, fold it upward, squeegee the excess mud out. Now, I just picked up this cheap little pudding knives at the Home Depot in the [ ] department so I can show the Do it yourselfers, make sure you get a pudding knife like this for the corners, for the whole tub, you’ll see it’s a very important to have. So, there you go there’s your corner. And you are good to go. Okay, we’re gonna install our corners here and here and then we’re done.