Heated Floors

Trugard Direct provides a complete line of heated floors that supply warmth and comfort to organisations and houses. All our ground warming systems use premium warming-wire elements and are backed by exceptional service and technical support.

Ground Warming Mats
Trugard Direct supplies easy-to-install thin, durable electrical warming mats developed to warm stone and tile and laminate groundings in bathrooms, kitchen areas, sunrooms and entries.

Best Used For:
- Square and rectangular areas
- Showers.
- Custom-made designs.

Grounding Warming Wire.
Grounding warming wire solutions can be set up below ceramic and porcelain tile and stone and brick grounds, as well as in self-leveling mortar listed below vinyl, drifting wood and laminate groundings.

Finest Utilized For:.
- Rooms of all sizes and shapes.
- Angles and curves.
- Areas with higher heat loss.

UnderGround Warming.
Electric grounding warming services are not just for brand-new building and construction. Our underground warming options are created for easy installation in between the joist bays under an existing ground.

Finest Used For:.
- Retrofit applications.
- All types of ground coverings.
- Crawl spaces and basements.

Our electrical underground warming systems are offered for a variety of grounding surface areas, consisting of tile, wood, stone, and carpet. We have a broad variety of warming aspects consisting of rolls, cable televisions, and warm ground mats.

Why Install Heated Floors?
Comfort The number one factor to install glowing warming under a brand-new ground is definitely the convenience, a warm ground is literally high-end you can feel but you probably currently knew that. Affordable Electric ground warming is economical if you put it in while you're already setting up a grounding or changing. Flexible Under grounding warming can be utilized as your main heat source or as a method to include extra heat to spaces that are challenging to heat like the basement or a space above a garage.

Ceramic and stone tile are the most common type of warm ground. Solid wood groundings can establish gaps if they dry and diminish when warmed. Carpet or rugs can go over a warm ground, however they act as insulators and decrease heat circulation to your feet and to the room as a whole.
Kinds Of Electric Warm Grounds:.
1. Loose Cable.
For this kind of electric warm ground covering, the cable television begins a spindle, much like any other wire. Loose cable television is by far the most inexpensive way to heat up a ground and it's simply as reliable as the other systems. The downside of loose cable television is setup time; you have to position the cable in a serpentine pattern, fasten it with lots of hot glue or staples, and after that "embed" it. A lot of loose cable systems consist of end channels that direct spacing (image, below). You can position cables close together to make the grounding heated up faster and reach a higher temperature or farther apart to utilize less cable. Manufacturers provide different cable television lengths to match the ground's square video footage. You can't splice areas of cable television together to serve a larger space or repair damaged cable television (this is true of all electric systems). Secure the cable every 6 in. It can't drift or move while you embed the cable television.

Thin-Set Method.
There are 2 ways to embed cable television: You can install the cable over tile backer board and after that cover it with "thinset," the mortar adhesive used for ceramic tile (image above). The thin-set diminishes as it treatments, so you might need to include a second layer after the first hardens to level it out. Producing a completely flat, smooth surface area with thin-set is hard. You can make it smooth enough for ceramic tile or a drifting grounding but probably not smooth enough for vinyl ground covering.

Self-Leveling Method.
For a faster, smoother surface area, set up the cable without backer board and put on "self-leveling substance," or SLC. You can then lay tile, carpet, vinyl or a floating ground straight over the SLC.
2. Fit together Mats.
The cable comes already woven into a plastic internet. The prepositioned cable sets up quickly-- in less than half the time for loose cable television. You just staple or hot glue the mesh to the grounding. As with loose cable television, you then embed the cable and mesh.
You can cut the mesh into sections to cover your ground or fit around corners. The mesh tends to "drift" as you embed it, so attach it to the ground every 6 in. After embedding it, you can lay tile, carpet, vinyl or a floating ground.
3. Solid Mats.
Solid mats are typically the most expensive electric system, but they're likewise the simplest to install. The cable television is entirely.
enclosed in artificial material, plastic sheeting or metal foil. The huge advantage is that you don't need to embed it as you do loose cable television or mesh mats.

Under-Mat
With under tile versions, you just smooth the mat onto a bed of thin-set. You spread out more thin-set with a grout float over the mat. And after it solidifies comb more thin-set over the mat to set ceramic or stone tile as you generally would.

Under Drifting Ground Mat
The under a drifting grounding solid mat systems are even simpler to set up; you just present the mats, tape them together and you're done. You can then lay a floating wood or laminate grounding straight over the warm grounding.

Under-Ground Mat Strategy
Mats are readily available in various measurements, and you can combine mats of different sizes to cover your grounding. Some mats are sized to fit in between joists, so you can heat up the ground from below as revealed above-- a big benefit if you do not wish to replace an existing grounding. And you can staple mats in between joists to warm the grounding above. Then insulate the underside of the mat with R-13 or thicker fiberglass batts. Don't install electric heat under a subground unless the system is particularly intended for that technique.

It can be a luxurious-feeling service for a cold space in your house or a clever general technique for warming your entire home. It's an often-requested upgrade for brand-new homes, so it may likewise assist close a deal for those aiming to turn a residential or commercial property or resell in a market with requiring buyers.

Imagine bare feet walking throughout a good cozy grounding that likewise has all the advantages associated with tile. An allergen-free grounding covering, tile is readily available in limitless styles, colors, and sizes, and uses easy-maintenance too.
When appropriately installed, a warm tile ground is almost unbreakable. To secure the stability of your investment, tiles require to be protected from numerous angles: from below, at perimeters and transitions, and within big growths.

Uncoupling
The frequent changes in temperature triggered by a heated warming system result in more growth and contraction of materials in the ground assembly. These frequent modifications produce greater motion stresses in the tile covering and increase the need for uncoupling. Existing setup methods require the installation of two separate systems-- a grounding warming system and an uncoupling system.
We offer ground warming and uncoupling in a single layer. Uncoupling refers to the act of preventing any motion and tension that takes place in the subground from moving through to the tile above, therefore preventing broken tiles and grout.
Let's have an appearance at 2 situations for warm grounds, both featuring the warm system. Each of the 2 applications below is a total grounding warming system, but cover 2 different ground covering substrates to optimize their use: for usage on plywood or OSB substrates and with an integrated thermal break for usage on concrete substrates.

Integrate the appeal and durability of tile with the comfort of an electric grounding warming system to bring a touch of high-end into any room of the house. It is the only electrical ground warming system that directly integrates uncoupling innovation to make sure that groundings aren't susceptible to split tiles and grout. Cables can be put anywhere heat is desired for personalized warming zones, and no leveling substances are required, which makes for a fast and simple installation.
With the tested technology of our warming system uncoupling membrane incorporated in the style, it provides the perfect solution for bringing convenience and ground warming to any tiled ground.

Absolutely nothing feels much better first thing in the early morning than strolling into the bathroom and experiencing the reassuring warmth of warm tiles on bare tootsies. Here's how to make that take place.

It's a cold winter's morning as your creep into the bathroom. You're not welcomed by a freezing ground-- rather, calming heat leaks up from underneath you. Great thinking installing that in-ground warming system.

This can be utilized when installing new groundings, and it's likewise a choice when the ground covering is currently installed but you have access to the underside of the subground. You can install the plastic tubing to the underside of the ground.

is typically utilized with ceramic, marble, or stone floors, which we cover here. In-floor heat can likewise be utilized with some wood grounding. Engineered wood is the finest option because it can handle the changes in temperature with very little shrinking and expanding.
Radiant systems ought to not run under or even butt versus cabinets, the bath tub or shower enclosure, a whirlpool, or toilet. Make an at-scale sketch of the room to share with the radiant grounding provider or merchant, then buy the materials to satisfy your space measurements.

Set up the Underlayment
Set up cement backer board over the subground, just like you 'd do for a regular tile job. Cement board is a better option than plywood because the latter can contract and expand as the in-ground heat is turned on and off. Adhere the backer board to the subground with thin-set mortar.

Place the cement board in the mortar with the rough side up. Screw it down with 1-1/4- inch cement board screws, which are deterioration resistant and have heads that sit flush with the cement board surface. Drive a screw about every 8-inches. Keep the cement board 1/4-inch from walls. When the cement board is set up, cover the seams with mesh cement board tape, then spread thin-set mortar over the leading with a broad putty knife or flat trowel. This gives you flat surface area.
Protect the mats to the cement board. Unroll the warming mat on the ground. Some mats have double-sided tape so you can stick the mat to the ground.


Run the Power
For a small room, it may be possible to tap into an existing circuit to power the warm grounding. Install the circuit, then install the thermostat that turns on the warm ground. Link the thermostat to the ground cable television.

Lay the Tile
All that's left now is installing the tile. This story deal detailed directions for a quality tile job. Installing the tile over the glowing ground system is no different from installing it over cement board without the ground system. You merely trowel the thin-set mortar over the warming mat, then lay the tile. Simply beware so your trowel does not capture and pull the mesh or clip the cable. You'll need to put the warm floor sensing unit someplace in the grounding and tile over it. When the ground reaches its programmed temperature, the sensing unit turns off the heat.


Wait a Month
You'll be nervous to turn on the heat, but you need to wait 28 days. Since the mortar has to totally cure first, that's. As soon as the wait duration is over, turn on the heat, begin your shoes, and reward your feet with soothing heat.

All-in-One Option
Another choice is to install a self-contained system like Warmboard. It's available in two ranges. Warmboard-S is a structural subground and radiant panel in one. It is designed to be utilized in new building, and is frequently set up straight over a ground joist. Warmboard-R is a smaller, thinner panel suitable for retrofits and remodels. Warmboard-R is set up over an existing subground or piece, but is also used in walls or ceilings when the original grounds should remain undamaged.
With a system like Warmboard there is no waiting and as soon as your grounding is down you are all set to go. Installing the tile over the glowing grounding system is no various from installing it over cement board without the ground system. You'll require to put the heated ground sensor someplace in the ground and tile over it.

View as Grid List

2 Items

per page
Set Descending Direction
  1. Radiant Floor Heating

    From $17.54

    To $1,493.23 Regular Price $2,272.77

    Quickview
  2. Programmable Thermostat

    From $179.00 Regular Price $275.38

    To $7,030.00 Regular Price $10,969.23

    Quickview
View as Grid List

2 Items

per page
Set Descending Direction
Copyright © 2018 Trugard Direct. All Rights Reserved. | Created by AVID Dynamics.